 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| 8-Channel EMI Filter Array with ESD Protection CM1443-08CP Features * * * * * Eight channels of EMI filtering for data ports Pi-style EMI filters in a capacitor-resistorcapacitor (C-R-C) network +15kV ESD protection on each channel (IEC 61000-4-2 Level 4, contact discharge) +30kV ESD protection on each channel (HBM) Chip Scale Package (CSP) features extremely low lead inductance for optimum filter and ESD performance 20-bump; 0.4mm pitch, 3.160 x 1.053mm footprint TM OptiGuard coating for improved reliability at assembly RoHS-compliant, lead-free finishing Applications * * * * * * EMI filtering and ESD protection for both data and I/O ports Wireless Handsets Handheld PCs / PDAs MP3 Players Notebooks Desktop PCs * * * Electrical Schematic (Pins A1 CS CS (Pins C1 - C8) (Pins B1 -B4) 1 of 8 EMI/RFI+ESD Channels (c)2010 SCILLC. All rights reserved. April 2010 Rev. 2 Publication Order Number: CM1443-08CP/D CM1443-08CP PIN DESCRIPTIONS PIN A1 A2 A3 A4 A5 A6 A7 A8 B1-B4 NAME FILTER1 FILTER 2 FILTER 3 FILTER 4 FILTER 5 FILTER 6 FILTER 7 FILTER 8 GND DESCRIPTION Filter Channel 1 Filter Channel 2 Filter Channel 3 Filter Channel 4 Filter Channel 5 Filter Channel 6 Filter Channel 7 Filter Channel 8 Device Ground PIN C1 C2 C3 C4 C5 C6 C7 C8 NAME FILTER 1 FILTER 2 FILTER 3 FILTER 4 FILTER 5 FILTER 6 FILTER 7 FILTER 8 DESCRIPTION Filter Channel 1 Filter Channel 2 Filter Channel 3 Filter Channel 4 Filter Channel 5 Filter Channel 6 Filter Channel 7 Filter Channel 8 - Rev. 2 | Page 2 of 13 | www.onsemi.com CM1443-08CP Ordering Information PART NUMBERING INFORMATION Lead-free Finish Bumps 20 Package CSP Ordering Part Number CM1443-08CP 1 Part Marking N438 Note 1: Parts are shipped in Tape & Reel form unless otherwise specified. Specifications ABSOLUTE MAXIMUM RATINGS PARAMETER Storage Temperature Range DC Power per Resistor DC Package Power Rating RATING -65 to +150 100 600 UNITS C mW mW STANDARD OPERATING CONDITIONS PARAMETER Operating Temperature Range RATING -40 to +85 UNITS C Rev. 2 | Page 3 of 13 | www.onsemi.com CM1443-08CP ELECTRICAL OPERATING CHARACTERISTICS SYMBOL R CT CS TCR TCC VDIODE ILEAK VSIG PARAMETER Resistance Total Capacitance Single Capacitor Temperature Coefficient of Resistance Temperature Coefficient of Capacitance Diode Voltage (reverse bias) Diode Leakage Current (reverse bias) Signal Voltage Positive Clamp Negative Clamp In-system ESD Withstand Voltage a) Human Body Model, MIL-STD-883, Method 3015 b) Contact Discharge per IEC 61000-4-2 Level 4 Clamping Voltage during ESD Discharge MIL-STD-883 (Method 3015), 8kV Positive Transients Negative Transients Cut-off frequency ZSOURCE = 50, ZLOAD = 50 At 2.5V DC IDIODE=10A VDIODE=3.3V ILOAD = 10mA 5.6 -1.5 Notes 2 and 4 30 15 Notes 2,3 and 4 +10 -5 R = 100, CS = 8.5pF 220 6.8 -0.8 5.5 0.1 At 2.5V DC At 2.5V DC CONDITIONS MIN 80 14 TYP 100 17 8.5 1200 -300 1 MAX 120 21 UNITS pF pF ppm/ C ppm/ C V 1.0 A 9.0 -0.4 V V VESD kV kV VCL V V MHz fC Note 1: TA=25 unless otherwise specified. C Note 2: ESD applied to input and output pins with respect to GND, one at a time. Note 3: Clamping voltage is measured at the opposite side of the EMI filter to the ESD pin. For example, if ESD is applied to Pin A1, then clamping voltage is measured at Pin C1. Note 4: Unused pins are left open. Rev. 2 | Page 4 of 13 | www.onsemi.com CM1443-08CP Performance Information Typical Filter Performance (TA=25 DC Bias=0V, 50 Ohm Environment) C, Figure 1. Insertion Loss VS. Frequency (A1-C1 to GND B1) Figure 2. Insertion Loss VS. Frequency (A2-C2 to GND B1) Rev. 2 | Page 5 of 13 | www.onsemi.com CM1443-08CP Performance Information (cont'd) Typical Filter Performance (TA=25 DC Bias=0V, 50 Ohm Environment) C, Figure 3. Insertion Loss VS. Frequency (A3-C3 to GND B2) Figure 4. Insertion Loss VS. Frequency (A4-C4 to GND B2) Rev. 2 | Page 6 of 13 | www.onsemi.com CM1443-08CP Performance Information (cont'd) Typical Filter Performance (TA=25 DC Bias=0V, 50 Ohm Environment) C, Figure 5. Insertion Loss VS. Frequency (A5-C5 to GND B3) Figure 6. Insertion Loss VS. Frequency (A6-C6 to GND B3) Rev. 2 | Page 7 of 13 | www.onsemi.com CM1443-08CP Performance Information (cont'd) Typical Filter Performance (TA=25 DC Bias=0V, 50 Ohm Environment) C, Figure 7. Insertion Loss VS. Frequency (A7-C7 to GND B4) Figure 8. Insertion Loss VS. Frequency (A8-C8 to GND B4) Rev. 2 | Page 8 of 13 | www.onsemi.com CM1443-08CP Performance Information (cont'd) Typical Filter Performance (TA=25 DC Bias=0V, 50 Ohm Environment) C, Figure 9. Comparison of Filter Response Curves for CM1443 VS. DC Bias Figure 10. Filter Capacitance vs. Input Voltage over Temperature (normalized to capacitance at 2.5VDC and 25 C Rev. 2 | Page 9 of 13 | www.onsemi.com CM1443-08CP Performance Information (cont'd) Figure 11. Resistance vs. Temperature (normalized to resistance at 25C) Application Information Refer to Application Note AP-217, "The Chip Scale Package", for a detailed description of Chip Scale Packages offered by California Micro Devices. Rev. 2 | Page 10 of 13 | www.onsemi.com CM1443-08CP Mechanical Details 8-Channel CSP Mechanical Specifications The CM1443-08CP is offered in a custom Chip Scale Package (CSP). Dimensions are presented below. PACKAGE DIMENSIONS Package Bumps Dim Millimeters Min A1 A2 B1 B2 B3 B4 C1 C2 D1 D2 Nom Max Min Custom CSP 20 Inches Nom Max 3.115 3.160 3.205 0.1226 0.1244 0.1262 1.008 1.053 1.098 0.0397 0.0415 0.0432 0.395 0.400 0.405 0.0156 0.0157 0.0159 0.195 0.200 0.205 0.0077 0.0079 0.0081 0.342 0.347 0.352 0.0135 0.0137 0.0139 0.342 0.347 0.352 0.0135 0.0137 0.0139 0.130 0.180 0.230 0.0051 0.0070 0.0091 0.130 0.180 0.230 0.0051 0.0070 0.0090 0.545 0.615 0.685 0.0215 0.0242 0.0270 0.378 0.419 0.460 0.0149 0.0165 0.0181 3500 pieces Package Dimensions for 8-Channel CM1443-08CP Chip Scale Package # per tape and reel Controlling dimension: millimeters Rev. 2 | Page 11 of 13 | www.onsemi.com CM1443-08CP CSP Tape and Reel Specifications POCKET SIZE (mm) B0 X A0 X K0 3.28 X 1.32 X 0.81 TAPE WIDTH W 8mm REEL DIAMETER 178mm (7") QTY PER REEL 3500 PART NUMBER CM1443-08CP CHIP SIZE (mm) 3.16 X 1.053X 0.615 P0 4mm P1 4mm + + + Figure 12. Tape and Reel Mechanical Data Rev. 2 | Page 12 of 13 | www.onsemi.com CM1443-08CP ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. INFORMATION PUBLICATION ORDERING INFORMATION FULFILLMENT: LITERATURE FULFILLMENT Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: Phone 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: Fax 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: orderlit@onsemi.com Email Support: N. American Technical Support 800-282-9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81-3-5773-3850 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative Rev. 2 | Page 13 of 13 | www.onsemi.com |
Price & Availability of CM1443-08CP
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |